22.07.2018, 14:35
Hello Tim,
first excuse my english.
i can't say, if the linkage is overloaded. It depends not only by the water, further ist the weight of the spray unit und the leverage important.
in your case it makes sense to check if hydraulic pressure is o.k. Connect a monometer with an hydraulic connection, for example the connection where you lift an trailer. I don't know the exact value, but it should be about 180 bar or 2600 psi.
the objectiv ist to find out, if the hydraulic gearpump is worn. A good indicator is, if the value gets down by low speeds and warm machine.
Good luck
Gerhard
first excuse my english.
i can't say, if the linkage is overloaded. It depends not only by the water, further ist the weight of the spray unit und the leverage important.
in your case it makes sense to check if hydraulic pressure is o.k. Connect a monometer with an hydraulic connection, for example the connection where you lift an trailer. I don't know the exact value, but it should be about 180 bar or 2600 psi.
the objectiv ist to find out, if the hydraulic gearpump is worn. A good indicator is, if the value gets down by low speeds and warm machine.
Good luck
Gerhard